Author: Hu, L.X.
Paper Title Page
TUPA07 Collimator for Beam Position Measurement and Beam Collimation for Cyclotron 224
 
  • L.X. Hu, Y. Chen, K.Z. Ding, J. Li, Y. Song, Q. Yang
    ASIPP, Hefei, People's Republic of China
  • Y.C. Wu, K. Yao
    HFCIM, HeFei, People's Republic of China
 
  Funding: This work is supported in part by grants 1604b0602005 and 1503062029.
In order to restrict the beam dispersion and diffusion at the extraction area of the cyclotron and to detect abnormal beam loss, a beam collimator system has been designed to collimate the beam and to measure its transverse positions. The collimator system is composed of a vacuum cavity, two pairs of beam targets, a set of driving and supporting mechanism, and a measurement and control unit. The beam target with the size determined by the diameter of the beam pipe, the particle energy and beam intensity, will generate current signal during particle deposition. Each pair of beam targets has bilateral blocks which forms a slit in either horizontal or vertical direction. Servo motor and screw rod are used so that the target can reciprocate with the repeatability of less than 0.1mm. The measurement and control system based on LabVIEW can realize the motion control and current measurement of the targets and then calculate the beam transverse positions.
 
poster icon Poster TUPA07 [1.603 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2018-TUPA07  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)