Keyword: brilliance
Paper Title Other Keywords Page
MOPC16 The Development and Applications of Digital BPM Signal Processor on SSRF SRF, controls, FEL, storage-ring 147
  • L.W. Lai, F.Z. Chen, Y.B. Leng, Y.B. Yan, N. Zhang, W.M. Zhou
    SSRF, Shanghai, People's Republic of China
  The development of Digital BPM Signal Processors (DBPM) for SSRF started from 2008. The first prototype for SSRF storage ring was completed in 2012, with turn-by-turn resolution better than 1μm. From 2016 to 2017, SSRF successively constructed two FEL facilities in China, DCLS and SXFEL test facilities. The second ver-sion DBPM was developed and used in large scale during this period to meet the requirements of signal processing for stripline BPMs and cavity BPMs. After that, we turned to the development of DBPM for SSRF storage ring based on the second version hardware, including FPGA firmware, EPICS IOC, EDM control panel. The development was completed and tests were carried out in early 2018. Test results showed that the position data is accurate and can monitor beam movement correctly, and online turn-by-turn position data resolution reaches 0.46μm. This paper will introduce the design of DBPM for the SSRF storage ring and the tests carried out to verify the data accuracy and evaluate the system performance.  
poster icon Poster MOPC16 [1.372 MB]  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUOC04 Development of Beam Position Monitor for the SPring-8 Upgrade electron, radiation, electronics, vacuum 204
  • H. Maesaka
    RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
  • H. Dewa, T. Fujita, M. Masaki, S. Takano
    JASRI, Hyogo, Japan
  We are developing a new electron beam position monitor (BPM) system for the low-emittance upgrade of SPring-8. The requirements for the BPM system are: (1) a single-pass resolution of 100 µm rms for a 100 pC bunch and an electric center accuracy of 100 µm rms for the initial beam commissioning to achieve the first turn, (2) a closed-orbit distortion (COD) resolution better than 0.1 µm rms for a 100 mA stored beam and a position stability of less than 5 µm for the ultimate stability of a photon beam axis. We have completed prototypes of a precise button electrode and a BPM block to obtain high-intensity signals and sufficient mechanical accuracy while suppressing high-Q trapped modes leading to impedance and heating issues. The development of readout electronics based on the MTCA.4 standard and the evaluation of radiation-hard coaxial cables have also been conducted. The prototype BPM head was installed in the present SPring-8 storage ring for performance verification with an actual electron beam. We confirmed sufficient signal intensity, electric center accuracy, position stability, etc. by the beam test. The new BPM system is almost ready for the SPring-8 upgrade.  
slides icon Slides TUOC04 [2.126 MB]  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUPB12 Machine Studies with Libera Instruments at the SLAC Spear3 Accelerators booster, injection, feedback, synchrotron 284
  • S. Condamoor, W.J. Corbett, D.J. Martin, S. C. Wallters
    SLAC, Menlo Park, California, USA
  • M. Cargnelutti, P. Leban
    I-Tech, Solkan, Slovenia
  • L.W. Lai
    SSRF, Shanghai, People's Republic of China
  • Q. Lin
    Donghua University, Shanghai, People's Republic of China
  Turn-by-turn BPM readout electronics were tested on the SPEAR3 booster synchrotron and storage ring to identify possible improvements for the booster injection process and to characterize processor performance in the storage ring. For this purpose, Libera Spark and Libera Brilliance+ instruments were customized for the booster (358.4 MHz) and storage ring (476.3 MHz) radio-frequencies, respectively, and tested during machine studies. Even at low single-bunch booster beam current, the dynamic range of the Libera Spark readout electronics provided excellent transverse position measurement capability during the linac-to-booster injection process, the energy ramp-up phase and during beam extraction. Booster injection efficiency was also analyzed as a function of linac S-band bunch train arrival time. In the SPEAR3 storage ring turn-by-turn Libera Brilliance+ measurement capability was evaluated for single and multi-bunch fill patterns as a function of beam current. The single-turn measurement resolution was found to be better than 10 microns for a single 3 mA bunch. The horizontal single-bunch damping time was then determined with the 238 MHz bunch-by-bunch feedback system on and off.  
poster icon Poster TUPB12 [1.531 MB]  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
TUPC01 Australian Synchrotron BPM Electronics Upgrade electron, coupling, synchrotron, storage-ring 297
  • Y.E. Tan, R.B. Hogan
    AS - ANSTO, Clayton, Australia
  The storage ring at the Australian Synchrotron (AS) was originally equipped with 98 Libera Electrons. In late 2017 all 98 of the BPM electronics has been upgraded to Libera Brilliance+ and the old Libera Electrons have been moved to the injection system. The transition process and results from commissioning the new system will be presented.  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)