Keyword: positron
Paper Title Other Keywords Page
WEPA18 Development of Longitudinal Beam Profile Diagnostics for Beam-beam Effects Study at VEPP-2000 electron, synchrotron, collider, injection 410
  • M.V. Timoshenko, V.M. Borin, O.I. Meshkov, Yu. A. Rogovsky, D.B. Shwartz, Yu.M. Zharinov
    BINP SB RAS, Novosibirsk, Russia
  • V.L. Dorokhov
    BINP, Novosibirsk, Russia
  The comprehensive development of beam longitudinal profile measurement systems based on stroboscopic optical dissector has started at VEPP-2000 electron-positron collider complex. The dissector was setted and commissioned at booster ring BEP that was deeply upgraded (2013-2015) to achieve top energy of 1 GeV. Bunch lengthening with current was studied at BEP with its new RF-cavity. In addition the method of synchrotron frequency measurement by dissector was applied. After dissector checkouts at BEP the similar studies were carried out with a single beam at VEPP-2000 storage ring in parallel with streak-camera measurements. Good agreement of results was observed. Series of single-turn longitudinal and vertical bunch profiles snapshots was made by streak-camera with respect to delay after counter beam injection. The unexpected longitudinal beam dynamics was observed for intensities above the beam-beam threshold. These studies together with beam-beam coherent oscillations spectra seen by pickups are of a great interest for understanding of flip-flop phenomenon which establish a fundamental luminosity limit at VEPP-2000 operating with round beams.  
poster icon Poster WEPA18 [2.269 MB]  
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
WEPB10 Grating Scanner for Measurement of Micron-size Beam Profiles electron, photon, simulation, collider 448
  • L.G. Sukhikh, A. Potylitsyn, S.A. Strokov
    TPU, Tomsk, Russia
  • G. Kube, K. Wittenburg
    DESY, Hamburg, Germany
  Funding: The work was partly supported by the program ‘‘Nauka' of the Russian Ministry of Education and Science, grant # 3.1903.2017
Wire scanners are widely used for transverse beam size diagnostics. The minimum detectable beam size is affected by the diameter of a single wire. The smallest carbon or tungsten wires used so far have diameters of about 4 microns. With the development of modern electron accelerators and the demands from future linear electron-positron colliders, sub-micron beam sizes have to be resolved. In order to increase the resolution, the decrease of the wire diameter is required. The authors of Ref. * proposed to manufacture thin gold stripes of rectangular shape (widths are equal to 1 µm or 2 µm and height is equal to 3 µm) on Si3N4 membrane. We propose to use another arrangement of gold stripes with varying period on a Si substrate. A set of 11 stripes with 1 µm width and 10 micron height with varying gap width in the range 3-0.25 µm ("grating scanner") was simulated by using an analytical model and by the Geant4 code. By moving this scanner across the beam one could measure the Bremsstrahlung yield vs. the coordinate, resulting in an oscillating dependence. The visibility of the resulting image allows defining the beam sizes in the range of 0.5-1.5 µm for the proposed scanner parameters.
* S. Borrelli et al., "Generation and Measurement of Sub-Micrometer Relativistic Electron Beams", arXiv:1804.04252v1 [physics.acc-ph] 11 Apr 2018
DOI • reference for this paper ※  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)